More than 30 different types equipment for wastewater treatment and sludge
Tube Air Diffusers were developed for application in aeration tanks in municipal and industrial wastewater treatment plants.
DAF-units are intended for removal of hydrophobic contaminations such as lipids, petrochemicals, suspended and surface-active materials from wastewater. They are recommended for installation in pulp-and-paper, food and oil-refining industries.
Step Screens are intended for fine treatment and collect waste of fine and medium sizes from industrial and domestic wastewater. This type of screen is made of stainless steel AISI 304 and has 1-5 mm filtering mesh bar spacing.
Drum Screen outside is ultra-fine screen, recommended for food processing industry sewage plants with high content of feather, wool and fur.
Screw Compacting Presses are intended for the compacting and washing of waste collected on the sewer mechanized screens.
Tangential Grit Chambers are intended for extraction and removal highly precipitable particles (grit) of size more than 0.15 mm from municipal and industrial wastewater.
Mechanical treatment unit does the following tasks: Fine wastewater treatment, Wastes washing and compressing, Grit separation and washing, Washed grit dewatering, Grease separation and removal.
Chain Scrapers are used to remove sediments and floating material from the clarifiers, as well as grit removal from the grit chambers.
Chamber-membrane filter presses are intended for dewatering processes and in the production processes of different industries
Belt Filter Presses are intended for mechanical dewatering of wastewater sludge as well as drinking water treatment sludge and industrial slime.
Belt Thickeners can be used in a first stage of dewatering process, together with filter presses for its productivity improvement by initial sludge.
Units are used for cyclic preparation of polymer solutions on the basis of dry powder or liquid concentrates. This is good solution when certain preparation time is required.