Wastewater Treatment
La Junta WWTP in Colorado Replaces Rented Centrifuge with ESMIL Sludge Dewatering System
The La Junta Wastewater Treatment Plant in Colorado serves approximately 7,000 residents. Given the relatively small size of the facility, the plant had relied on a rented centrifuge for sludge dewatering for several […]
From Sludge Drying Beds to 24% Dry Solids: ESMIL System Improves Sludge Management at Dyer WWTP in Tennessee
The Dyer Wastewater Treatment Plant in Tennessee replaced open-air sludge drying beds with mechanical dewatering using an ESMIL-Tsurumi MDQ Multi-Disc Screw Press. The new system significantly reduces the time required to prepare sludge […]
Webinar Agenda: A Closer Look at Multi-Disc Screw Presses for Sludge Dewatering
On September 23, ESMIL and Treatment Plant Operator Magazine will host a technical webinar dedicated to the engineering, operation and practical application of ESMIL-Tsurumi MDQ Multi-Disc Screw Presses. The session will be presented […]
ESMIL x Treatment Plant Operator Magazine: Webinar on Multi-Disc Screw Presses for Sludge Dewatering
Sludge dewatering can have a significant impact on the operating costs of a wastewater treatment plant for many years. Decisions made during the design or upgrade stage affect not only dewatering performance, but […]
Rapid response to an operational challenge: how ESMIL Module D supported the Madisonville WWTP (KY, USA)
The wastewater treatment plant in Madisonville, Kentucky (USA) processes waste activated sludge (WAS) with an initial dry solids content of 3–5%. Recently, the facility began facing increasing operational loads, which led to the […]
How ESMIL’s Mobile Dewatering Unit Ensured Continuous Operation at the Hicksville Wastewater Treatment Plant (OH)
When the volume of generated sludge began to exceed the capacity of the existing dewatering system, the wastewater treatment plant in Hicksville (Ohio) faced a serious challenge. The traditional drying beds could no […]
From Current Challenges to Future Growth: How ESMIL’s MDQ Dewatering Unit Supports the Long-Term Efficiency of the Wilmington WWTP (OH)
How can a wastewater treatment plant manage the ever-increasing volume of generated sludge? This was the challenge faced by the Wilmington Wastewater Treatment Plant in Ohio. The facility’s rapidly changing operational demands prompted […]
ESMIL XJD-1500 Roller Press: Efficient Dewatering of Highly Abrasive Sludge at a Canadian Microelectronics Plant
The Esmil’ production team has completed the manufacture of an XJD-1500 roller press, which will be delivered to a Canadian company in the microelectronics sector. The unit will be used for dewatering sludge […]
Installation of the ESMIL DAF FT-25D system at an industrial wastewater treatment plant in Florida
ESMIL Corp completed the first stage of commissioning the advanced DAF FT-25D flotation system at an industrial wastewater treatment plant in a beverage production facility in Florida, USA. What is this project […]
Successful Commissioning of Multi-Disk Screw Press MDQ-402 at WWTP in Covington
Esmil Corp. successfully completed another project, involving the delivery and commissioning of the MDQ series Multi-Disk Screw Press at the wastewater treatment plant in Covington, Ohio. The solution provided by Esmil Corp. fully […]
