Sludge Dewatering
La Junta WWTP in Colorado Replaces Rented Centrifuge with ESMIL Sludge Dewatering System
The La Junta Wastewater Treatment Plant in Colorado serves approximately 7,000 residents. Given the relatively small size of the facility, the plant had relied on a rented centrifuge for sludge dewatering for several […]
From Sludge Drying Beds to 24% Dry Solids: ESMIL System Improves Sludge Management at Dyer WWTP in Tennessee
The Dyer Wastewater Treatment Plant in Tennessee replaced open-air sludge drying beds with mechanical dewatering using an ESMIL-Tsurumi MDQ Multi-Disc Screw Press. The new system significantly reduces the time required to prepare sludge […]
Webinar Agenda: A Closer Look at Multi-Disc Screw Presses for Sludge Dewatering
On September 23, ESMIL and Treatment Plant Operator Magazine will host a technical webinar dedicated to the engineering, operation and practical application of ESMIL-Tsurumi MDQ Multi-Disc Screw Presses. The session will be presented […]
ESMIL x Treatment Plant Operator Magazine: Webinar on Multi-Disc Screw Presses for Sludge Dewatering
Sludge dewatering can have a significant impact on the operating costs of a wastewater treatment plant for many years. Decisions made during the design or upgrade stage affect not only dewatering performance, but […]
More than 2× Higher Capacity and 18% DS with Variable Sludge Composition – MDQ Screw Press Implementation at an Industrial Facility in Knoxville (TN)
In March, ESMIL specialists commissioned an MDQ-502 CS multi-disk screw press at an industrial facility in Knoxville, TN. The client is a global leader in processing organic by-products into raw materials used in […]
11 Years of Stable, Downtime-Free Operation – The Story of the ESMIL MDQ Press at the municipal WWTP
In the daily operation of a wastewater treatment plant, sludge dewatering is often the stage that most clearly confirms whether equipment can sustain long-term performance. Stable operation, minimal downtime, and predictable maintenance costs […]
How ESMIL’s Mobile Dewatering Unit Ensured Continuous Operation at the Hicksville Wastewater Treatment Plant (OH)
When the volume of generated sludge began to exceed the capacity of the existing dewatering system, the wastewater treatment plant in Hicksville (Ohio) faced a serious challenge. The traditional drying beds could no […]
From Current Challenges to Future Growth: How ESMIL’s MDQ Dewatering Unit Supports the Long-Term Efficiency of the Wilmington WWTP (OH)
How can a wastewater treatment plant manage the ever-increasing volume of generated sludge? This was the challenge faced by the Wilmington Wastewater Treatment Plant in Ohio. The facility’s rapidly changing operational demands prompted […]
ESMIL XJD-1500 Roller Press: Efficient Dewatering of Highly Abrasive Sludge at a Canadian Microelectronics Plant
The Esmil’ production team has completed the manufacture of an XJD-1500 roller press, which will be delivered to a Canadian company in the microelectronics sector. The unit will be used for dewatering sludge […]
